• Smart Access Control Solutions

Full Height Turnstile Solution

Application of full height gate solution

The full-height turnstile is suitable for strict control areas and can effectively prevent climbing and drilling. When people pass through the turnstile, the turnstile controlled by management authority can deny entry to those without authority. If the person is allowed to pass through the authority, the turnstile will automatically let them pass. The traffic speed is about 30-40 people per minute.

✦ The blocking body (gate pole) of the full-height turnstile usually consists of 3 or 4 metal poles forming a "Y" (also known as three-pole turnstile) or "ten" shape (also known as cross gate or turnstile) parallel to the horizontal plane. usually using hollow, closed stainless steel tubes, which are strong and not easily deformed, and can be blocked and released through rotation.

✦ The main places where full-height turnstiles are used include: prisons, banks in military management areas, etc., and factories with very strict entry and exit management (such as chemical plants, construction sites, etc.). The mechanical part of the equipment includes an emergency control device.

When the power is cut off, the base swing arm can rotate freely to ensure clear passages; it complies with fire protection requirements and automatically locks when the power is turned on.

✦ It can be applied to all building environments, and can solve all control problems of pedestrian entrances and exitsIt can control whether the gate is locked or unlocked at any time. It has up to twenty signal interfaces to facilitate users expansion of functions.

Get solutions ⇣

Get a quote ⇣

LIDE

Full Height Turnstile Solution

Card Issuance

All newly added cards must be registered. Cards are issued through online software when registering. According to factory requirements, permissions can be set for employees to open or be restricted to open the designated access control.

Delete Card

Engage in a thorough discussion to understand your unique packaging needs.

Wide Control Range

The distance between each controller can reach 1200 meters, and each serial port can connect 63 controllers.

High Safety Performance

There are many ways to open the gate. The original data of the system will not be lost after power failure. It has a variety of alarm detection and allows remote opening and closing in case of danger.

Information Recording and Unlock Controlling

When someone swipes the card, the controller determines whether the card is valid based on the card number, current time and registration information, and controls whether to unlock the gate or not.

At the same time, the system will record the card number, card swiping time and other information. All these information can be displayed on a screen (if connected).

Real-Time Monitoring

The software of this solution is set to real-time monitoring status. Every time the card is swiped (if other events occur), the controller records the card number, card swiping location and other valid information and will immediately display it on the computer. In addition, the gate status (open or closed) can also be displayed in real time. If there is an external LED display, relevant information can be displayed on the screen.

This solution can connect open button input, gate magnetic detection and external card reader. LAN interconnection can be achieved by using TCP/IP converter. If factory access control is added later, it can be integrated into the existing access control and attendance system at any time, making it easy to operate.

Easy To Use

Simple installation, friendly interface, simple operation. For a networked system, only one 485 converter is needed to connect 63 controllers together and controlled by one computer.

The system software has a friendly interface, easy operation and powerful functions. The software can be updated in real time to make the controller function more powerful and complete.

Design Principles

System availability

The content of the turnstile access control system should meet actual needs and not be flashy. If we pursue the advancement of the system one-sidedly, it will inevitably lead to excessive investment and deviate too far from actual needs. Therefore, the practicality of the system is the first principle that should be followed. At the same time, the system's front-end products and system software have good learnability and operability. Especially the operability allows managers with basic computer operation skills to master the operation essentials of the system through simple training and reach the operational level capable of completing on-duty tasks.

System stability

Since the turnstile access control system is a system that works continuously for a long time and is related to prison management, the stability of the system is particularly important. The system is required to have more than three years of successful application experience in the market and have a corresponding customer base and customer service system.

System security

All equipment and accessories in the turnstile access control system, while operating safely and reliably, should also comply with relevant Chinese or foreign safety standards and be able to work effectively in non-ideal environments. Powerful real-time monitoring and linkage functions fully ensure the security of the user environment.

System scalability

The technology of the turnstile access control system continues to advance, and user needs are also changing. Therefore, the design and implementation of the swing gate access control system should take into account the actual needs for future expansion, that is, the flexibility to increase, decrease, or update each sub-system. to meet the needs of different periods.

When designing the system, the functions that need to be implemented are reasonably configured, and this configuration can be changed. Even after the project is completed, changing this configuration is possible and convenient.

The system software is upgraded and improved accordingly according to the developers' needs in meeting market needs in different historical periods, and free software upgrades are provided for corresponding application customers free of charge.

Ease of system maintenance

The maintenance of the turnstile access control system during operation should be as simple and easy as possible. The operation of the system can truly work as soon as the power is turned on, and it can run as soon as it is plugged in. And there is no need to use too many special maintenance tools during the maintenance process.

From the configuration of the computer to the configuration of the system, the configuration of the front-end equipment has fully and carefully considered the system reliability and implemented the corresponding certification. While we strive to keep the system failure rate low, we also consider ensuring that data can be easily saved and quickly restored even if problems occur due to unexpected reasons, and that channels can be quickly opened in emergencies. The maintenance of the entire system is online, and the normal operation of all equipment will not be stopped due to the maintenance of some equipment.

Are you ready? Start your customized intelligent access control solution.

We provide solutions for over 2,000 smart access control projects

The experienced after-sales service team has leaded and implemented more than 2,000 projects.

Combined with your on-site situation, we can provide detailed installation drawings, installation explanation videos, and voice or video connections to provide you with thoughtful and worry-free after-sales support services.

Start a project ⇣

Get in touch

Let us be your trusted partner in driving success and achieving your objectives. Explore our comprehensive suite of services and take the first step towards unlocking your business's full potential today.

Please enter your name not exceed 100 characters

Name

The email format is not correct or exceed 100 characters, Please reenter!

Please enter a valid phone number!

Phone

Please enter your field_174 not exceed 100 characters

Company Name

Please enter your content not exceed 500 characters

Content